| NFPA Notes: |
- NFPA 80 Standards
- 6.4.5 Protection Plates 6.4.5.1
- Factory installed protection plates shall be installed in accordance with the listing of the door. 6.4.5.2
- Field installed protection plates shall be labeled and installed in accordance with their listing. 6.4.5.3
- Labeling shall not be required where the top of the protection plate is not more than 16" (406mm) above the bottom of the door.
- Note: If needing the 190S with rounded corners, please order the 196R.
|
Door Protection Plate
0.050" gauge with four beveled edges
Door Protection Plates
Gauge:
|
- 0.050" (1 mm)
|
Materials:
|
- Aluminum, Brass, Bronze, Stainless Steel
|
Finishes:
|
- US3, US4, US10, US10B, US28, US32, US32D
|
Bevel:
|
- 4 edges
|
Order:
|
- Furnish item #, height, width, and finish (i.e., 190S – 6'' x 30'', US32D).
- Plates are sized on even inches. Odd size available and priced to next larger size.
- May be ordered with countersunk holes (specify "CSK") at extra charge.
|
Options:
|
- UL listed for US32 and US32D with screw fasteners (must specify UL stamp)
- Self-adhesive tape available on all plates
- Spanner head screws
- Torx head screws
- Round corners - specify 196R
- Wrap around side and bottom return
- 0.125" material
|
Certification:
|
- Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate
|
| EPD: |
- Door Protection Plates Environmental Product Declaration
|
| Item # |
B&S Gauge |
US Gauge |
Bevel |
Fasteners |
Quantity Bag |
Quantity Case |
| 190S |
16 |
18 |
B4E |
#6 x 5/8 truss head screws |
1 each |
- - - |
| 196R |
16 |
18 |
none |
#6 x 5/8 truss head screws |
1 each |
- - - |
| 198S |
- - - |
20 |
none |
#6 x 5/8 truss head screws |
1 each |
- - - |
| 199B |
- - - |
38 |
none |
#6 x 5/8 truss head screws |
1 each |
- - - |
| 220S |
14 |
16 |
B4E |
#6 x 5/8 truss head screws |
1 each |
- - - |