| Features: |
- 2 units, 2 controllers - doors operate independently from each other
- Single person installation
- Pre-drilled mounting holes for ease of installation
- Built-in adjustable door stop for protection against wind or abusive environments
- Interfaces with electric door hardware
- Operates as a mechanical closer if power is disconnected
- Obstacle recognition upon opening and closing
- On-board power supply
- Blow open function for smoke ventilation
- Boost on close - selectable on/off
|
| Notes: |
- Must specify push or pull side mount
|
| Warranty: |
- Two years
|
| Also Available: |
- Single Operator (8418)
- Simultaneous Pair (8419)
- Double Egress Simultaneous Pair (8421)
- Double Egress Independent Pair (8422)
- Single Operator paired with 5100 Series Mechanical Closer (8423) |
Independent Pair
Low Energy Power Operators
ELECTRICAL
Power Requirements:
Current Draw:
Auxiliary Output Voltage:
Fuse Type:
Electric Lock Relay Type:
Lock Relay Rating:
|
115 VAC 60 HZ
3.0A
24 VDC 500mA
2.0A, 5 x 20mm, Slo-Blo
Form “C” SPDT
5.0A @ 28 VDC |
|
DIMENSIONS
Size:
Reveal:
Max Door Weight:
Standard Door Sizes: |
5" h x 4-1/2"d x Door Opening Width + 3"
Up to 12" standard
350 lbs
Single: 36"- 48" / Double: 60"- 96"
|
|
MECHANICAL
Spring Adjustment:
Max Degree of Swing:
On/Off/Hold Open Switch:
Swing Direction:
Operating Temperature:
|
5 lbs to 20 lbs closing force
180 degrees
Standard
Inswing/Outswing
- 40 degrees F to +140 degrees F
|
|
PARAMETERS
Hold Open Time:
Built-in-Stop:
Fire Alarm Input:
Internal Display:
Memory Type:
Adjustable Swing Degree: |
1 sec to continuous
Manual swing to 180 degrees/ Power swing to 100 degrees
FA input shunts swing activations until FACP is manually reset
LCD
Flash Upgradeable
80 degrees to 180 degrees
|
|
CERTIFICATIONS
ANSI:
Warranty:
UL/cUL:
UL10C:
|
Meets A156.19
2 years
Listed for up to 3 hours
Positive Pressure Rated |
|
FINISHES
ALM:
DBZ:
|
Aluminum (ALM)
Dark Bronze (DBZ) |
|
| Description | File Number |
| Hager 8400 Installation Instructions | I-CL00498 |
| 8400 QS Pull Arm Installation Instructions | I-CL00501 |
| 8400 QS Push Arm Installation Instructions | I-CL00502 Rev1 |
8400 Low Energy Power Operator Installation |
| div class="embed-responsive embed-responsive-16by9"> |
8400 Low Energy Power Operator Introduction |
| div class="embed-responsive embed-responsive-16by9"> |