Certifications: |
- BHMA Certified ANSI A156.3 Grade 1
- UL305 Listed for Panic Hardware
- UL/cUL Listed for all functions up to three hours for “A” label single doors
- UL10C Positive Pressure Rated
- UL10B Neutral Pressure Rated
- Complies with ANSI A117.1 for accessible building and facilities
|
Alarm Kit for 4600 Series Rim
and Vertical Rod Devices and
4600 Series Mortise Devices
Exit Devices & Trim
Battery: |
- Standard 9-Volt battery required, by other
- Audible chirp and alternating LED color flash when battery is low
|
Alarm: |
- 100 decibel horn sounds immediately upon pressing push pad
|
Cylinder: |
- 1-1/8” or 1-1/4” Mortise cylinders acceptable
- Hager standard cam required
- Cylinder sold separately
|
Activation: |
- Alarm is armed by turning key clockwise
- Alarm is disarmed by turning the key counter-clockwise
- Alarm is turned to service mode by turning the key counter-clockwise twice
|
Alarm Timing: |
- Alarm will sound either 1, 3, 5 minutes or continuously
- Times are selectable by on board switches
|
Warning Decal: |
- “Emergency Exit Only – Alarm will Sound” on push pad of exit device
|
Indicator: |
- LED Indicator
- Red LED will illuminate intermittently when armed
- Green LED will illuminate when unarmed
- Blue LED will illuminate in service mode
- Alternate colors flash when battery low
|
Options: |
- Tamper Switch available that sounds alarm when end cap is removed
- Latch monitor switch is available that sounds alarm when latch is retracted without actuating the push pad
- Latch Monitor Switch typically used with Surface Vertical Rod devices
- When utilizing the latch monitor, the outside trim unit will also sound alarm
|
Output: |
- Alarm is equipped with output port
|
Notes: |
- If ordering alarm kit (ALK) separately, must specify if using with 4600 Series (4600 Series - 4901)
|
Warranty: |
- One year on electrified components
- Lifetime on hardware components |