WARRANTY |
One-Year Warranty |
|
|
MODEL |
|
8218 |
Single Operator |
|
|
Also Available |
|
8219 |
Simultaneous Pair |
8221 |
Double Egress Simultaneous Pair |
|
|
APPLICATION |
• For use on interior & exterior non-fire rated outswing or
inswing doors |
|
• Standard unit allows for 24VDC activator, two push plates,
and a reactivation sensor |
|
• On-board provisions for door status, battery backup and
additional modules |
|
• Operates as a manual closer with or without power |
|
|
FEATURES |
|
Application Features: |
• Non-Handed |
|
• Three Operating Modes (On/Off/Hold Open) |
|
• Designed for doors up to 48" wide (1219 mm) |
|
• Designed for doors up to 275 lbs. (125 Kg) |
|
• On-Board power supply - 115 VAC 60 HZ single phase 5A |
|
- 0.75A @ 24VDC Output Standard
- 1.0A @ 24VDC Output Optional (w/ EDM 2-659-0275) |
|
|
Operational Functionality: |
• Power Open Spring Close
|
|
• 1/4+ HP DC Motor |
|
• Motor Protection Circuit - interrupts motor when there is
an obstruction during opening |
|
|
Programmable Functionality: |
• Push and Pull (selectable On/Off) |
|
• Power Assist Close |
|
• Power Boost Close - motor assist under wind and
stack pressure |
|
• Motor Hold Close |
|
• Power Open and Hold - for smoke evacuation |
|
• Adjustable Opening Force Limitation |
|
• Adjustable Opening and Closing Speeds |
|
• Adjustable Opening Angle |
|
• Adjustable Hold Open Time for Door Activators (0 - 60 sec.) |
|
• Sequential Operation (push to open/push to close operation) |
|
• Built-In Safety Circuit w/ Stall/Carpet/Safety
Slow/Reactivation |
|
- Stall: when door is in motion, most commonly used with
pull side door mounted sensor, the door stops before contact
is made. |
|
- Carpet: used with an over head presence sensor, keeps a closed
door closed and an open door open. |
|
- Safety slow: used with a door mounted sensor on pull side,
opens the door very slow. |
|
• Factory Reset |
|
• Optional programming with PIM &
iMotion programmer (sold separately)
|
|
|
Certification: |
• ANSI A156.19 compliant |
|
• ANSI/UL 325 listed for both United States and Canada |
|
• ADA compliant |
|
|
ELECTRICAL SPECIFICATIONS |
|
Power Supply: |
On-board output (24VDC) for door position status, alarm, etc. |
|
|
Operating Temperature:
|
+5° to 125° F (-15° to 50° C) ambient operating temperature
in all climatic conditions
|
|
|
Continuous Sound Level: |
<70 Db |
|
|
MECHANICAL SPECIFICATIONS |
|
Dimensions: |
Single: 4-9/16” H x 5” W x 31-1/2" L
(116 mm x 127 mm x 800 mm) |
|
Pair: 4-9/16” H x 5” W x 75-1/2" L
(116 mm x 127 mm x 1816 mm) |
|
|
Header Lengths: |
• Single: 31.5" (800 mm) |
|
• Single: 39.5" (1003 mm) |
|
• Pair: 75.5" (1198 mm) up to 101.5" (2578 mm) |
|
|
Arms: |
• Outswing Door Arm - for use w/ butt hung, offset and center
pivot doors |
|
• Telescoping Outswing Door Arm - accommodates door reveal
from 0”- 9-7/8” (0 mm - 251 mm) |
|
• Inswing Door Arm and Slide Track - for use w/ butt hung,
offset pivot doors (0") reveal |
|
• Optional Deep Reveal Inswing Door Arm and Slide Track -
center pivot or double egress doors, 0"- 6” (0 mm - 152 mm) reveal |
|
|
Opening Angles - Outswing: |
Adjustable (0-110 degrees) |
|
|
Opening Angles - Inswing: |
Adjustable (0-110 degrees); Deep Reveal Arm Maximum (90 degrees) |
|
|
Design Features: |
• Internal Adjustable Full Open End Stop |
|
• Lintel Mounted Back Plate - allows for fast and easy installation |
|
• Durable Steel End Plates |
|
|
OPTIONS |
|
Modules: |
|
2-659-0275 |
Exterior Door Module (EDM) for 8200 Auto Operator |
|
Provides On-Board Output for 24VDC Electric Strike or
Magnetic Lock as with (0.2 – 4.0s) delay |
|
|
2-659-0276 |
Multiple Door Module (MDM-B) for 8200 Auto Operator |
|
Allows for operation of double leaved doors |
Programmer: |
|
2-659-0277 |
Programming Interface Module (PIM) for 8200 Auto Operator |
2-659-0280 |
iMotion Programmer w/ 6' Cord |
|
|
Battery Backup: |
|
2-659-0278 |
Battery Backup with Interface Cable for 8200 Auto Operator |
2-659-0279 |
Battery Backup Extension Harness for 8200 Auto Operator |
|
|
Drive Shaft Arms: |
|
2-659-0283 |
2.65" Drive Shaft Arm (double egress/deep reveal) |
2-659-0284 |
3.22" Drive Shaft Arm (standard in & out) |
2-659-0285 |
3.94" Drive Shaft Arm (special applications) |
2-659-0286 |
4.84" Drive Shaft Arm (double egress out) |
2-659-0319 |
Drive Shaft Arm Removal Tool |
|
|
Arms & Assemblies: |
|
2-659-0287 |
Outswing Door Assembly (0 - 4.1875" reveal) CLR |
2-659-0288 |
Outswing Door Assembly (0 - 4.1875" reveal) BLK |
2-659-0289 |
Outswing Door Assembly (4.125 - 9.875" reveal) CLR |
2-659-0290 |
Outswing Door Assembly (4.125 - 9.875" reveal) BLK |
2-659-0291 |
Double Egress Outswing Door Arm Assembly
(0 - 4.1875" reveal) CLR |
2-659-0292 |
Double Egress Outswing Door Arm Assembly
(0 - 4.1875" reveal) BLK |
2-659-0293 |
Double Egress Outswing Door Arm Assembly
(4.125 - 9.875" reveal) CLR |
2-659-0294 |
Double Egress Outswing Door Arm Assembly
(4.125 - 9.875" reveal) BLK |
2-659-0295 |
Inswing Door Arm and Slide Track (0" reveal) CLR |
2-659-0296 |
Inswing Door Arm and Slide Track (0" reveal) BLK |
2-659-0297 |
RH Inswing Deep Reveal Arm and Track (0 - 6" reveal) CLR |
2-659-0298 |
RH Inswing Deep Reveal Arm and Track (0 - 6" reveal) BLK |
2-659-0299 |
LH Inswing Deep Reveal Arm and Track (0 - 6" reveal) CLR |
2-659-0300 |
LH Inswing Deep Reveal Arm and Track (0 - 6" reveal) BLK |
|
|
FINISHES |
|
ALM |
Aluminum anodized (standard) |
DBZ |
Dark bronze anodized |