Warranty: |
- One-Year Warranty |
Model: |
- 8219 - Simultaneous Pair |
Also Available: |
- 8218 - Single Operator
- 8221 - Double Egress Simultaneous Pair |
Features: |
- Non-handed
- Three Operating Modes (On/Off/Hold Open)
- Designed for doors up to 48" wide (1219 mm)
- Designed for doors up to 275 lbs (125 kg)
- Onboard power supply - 115 VAC 60 HZ single phase 5A
- 0.75A @ 24 VDC Output Standard
- 1.0A @ 24 VDC Output Optional (w/EDM 2-659-0275) |
Operational Functionality: |
- Power Open Spring Close
- 1/4+HP DC Motor
- Motor Protection Circuit - interrupts motor when there is an obstruction during opening |
Programmable Functionality: |
- Push and Pull (selectable On/Off)
- Power Assist Close
- Power Boost Close - motor assist under wind and stack pressure
- Motor Hold Close
- Power Open and Hold - for smoke evacuation
- Adjustable Opening Force Limitation
- Adjustable Opening and Closing Speeds
- Adjustable Opening Angle
- Adjustable Hold Open Time for Door Activators (0-60 sec.)
- Sequential Operation (push to open/push to close operation)
- Built-in Safety Circuit w/ Stall/Carpet/Safety
Slow/Reactivation
Stall: when door is in motion, most commonly used with pull side
door mounted sensor, the door stops before contact is made.
Carpet: used with an overhead presence sensor, keeps a closed
door closed and an open door open.
Safety slow: used with a door mounted sensor on pull side,
opens the door very slowly.
- Factory Reset
- Optional programming with PIM & iMotion programmer (sold separately)
|
Certification: |
- ANSI A156.19 compliant
- ANSI/UL 325 listed for both United States and Canada
- ADA Compliant |
Electrical Specifications: |
- Power Supply - On-board output (24VDC) for door position status, alarm, etc.
- Operating Temperature - +5° to 125° F (-15° to 50° C) ambient operating temperature
in all climatic conditions
- Continuous Sound Level - <70 Db |
Mechanical Specifications: |
- Dimensions
Single: 4-9/16” H x 5” W x 31-1/2" L (116 mm x 127 mm x 800 mm)
Pair: 4-9/16” H x 5” W x 31-1/2" L (116 mm x 127 mm x 800 mm) |
|
- Header Lengths
Single: 31.5" (800 mm)
Single: 39.5" (1003 mm)
Pair: 75.5" (1198 mm) up to 101.5" (2578 mm) |
|
- Arms
Outswing Door Arm - for use with butt hung, offset and center pivot doors
Telescoping Outswing Door Arm - accomodates door reval from 0" - 9-7/8" (0 mm - 251 mm)
Optional Deep Reveal Inswing Door Arm and Slide Track - center pivot or double egress doors,
0"-6" (0 mm - 152 mm) reveal |
|
- Outswing Opening Angles: Adjustable (0-110 degrees)
- Inswing Opening Angles: Adjustable (0-110 degrees), Deep Reveal Arm Maximum (90 degrees)
|
Design Features: |
- Internal Adjustable Full Open End Stop
- Lintel Mounted Back Plate - allows for fast and easy installation
- Durable Steel End Plates |
Options: |
|
Modules: |
- 2-659-0275 Exterior Door Module (EDM) for 8200 Auto Operator
Provides On-Board Output for 24VDC Electric Strike or Magnetic Lock as with (0.2 – 4.0s) delay |
|
- 2-659-0276 Multiple Door Module (MDM-B) for 8200 Auto Operator
Allows for operation of double leaved doors |
Programmer: |
- 2-659-0277 Programming Interface Module (PIM) for 8200 Auto Operator |
|
- 2-659-0280 iMotion Programmer w/ 6' Cord |
Battery Backup: |
- 2-659-0278 Battery Backup with Interface Cable for 8200 Auto Operator
- 2-659-0279 Battery Backup Extension Harness for 8200 Auto Operator |
Drive Shaft Arms:
|
- 2-659-0283 2.65" Drive Shaft Arm (double egress/deep reveal)
- 2-659-0284 3.22" Drive Shaft Arm (standard in & out)
- 2-659-0285 3.94" Drive Shaft Arm (special applications)
- 2-659-0286 4.84" Drive Shaft Arm (double egress out)
- 2-659-0319 Drive Shaft Arm Removal Tool |
Arms & Assemblies:
|
- 2-659-0287 Outswing Door Assembly (0 - 4.1875" reveal) CLR
- 2-659-0288 Outswing Door Assembly (0 - 4.1875" reveal) BLK
- 2-659-0289 Outswing Door Assembly (4.125 - 9.875" reveal) CLR
- 2-659-0290 Outswing Door Assembly (4.125 - 9.875" reveal) BLK
- 2-659-0291 Double Egress Outswing Door Arm Assembly (0 - 4.1875" reveal) CLR
- 2-659-0292 Double Egress Outswing Door Arm Assembly (0 - 4.1875" reveal) BLK
- 2-659-0293 Double Egress Outswing Door Arm Assembly (4.125 - 9.875" reveal) CLR
- 2-659-0294 Double Egress Outswing Door Arm Assembly (4.125 - 9.875" reveal) BLK
- 2-659-0295 Inswing Door Arm and Slide Track (0" reveal) CLR
- 2-659-0296 Inswing Door Arm and Slide Track (0" reveal) BLK
- 2-659-0297 RH Inswing Deep Reveal Arm and Track (0 - 6" reveal) CLR
- 2-659-0298 RH Inswing Deep Reveal Arm and Track (0 - 6" reveal) BLK
- 2-659-0299 LH Inswing Deep Reveal Arm and Track (0 - 6" reveal) CLR
- 2-659-0300 LH Inswing Deep Reveal Arm and Track (0 - 6" reveal) BLK |
Finishes: |
- ALM Aluminum anodized (standard)
- DBZ Dark bronze anodized |
|
|