Trim:
|
- Archer, August, William or Withnell lever with escutcheon trim
- Rim cylinder x optional pull
|
Covers:
|
- Stainless steel, zinc
|
Cover Tube:
|
- Aluminum
|
End Caps:
|
- Zinc
|
Door Width:
|
- 36" (914 mm) field sizeable to 30" (762 mm) panic-rated door
and 28" (711 mm) fire-rated door for devices with any monitoring switches
- 48" (1219 mm) field sizeable to 36" (914 mm) panic- or fire-rated door
for devices with any monitoring switches
- 36” (914 mm) field sizeable to 34” (864 mm) door minimum for devices with motorized electric latch retraction.
- 36” (914 mm) door minimum for devices with electric dogging, alarm kit or delayed egress.
- 48” (1219 mm) field sizeable to 42” (1067 mm) door minimum for devices with electric dogging, alarm kit and delayed egress.
- 48” (1219 mm) field sizeable to 40” (1016 mm) door minimum for devices with motorized electric latch retraction.
- 48” (1219 mm) door minimum for devices with delayed egress.
|
Door Thickness:
|
- 1-3/4" (44 mm)- Standard
|
| Projection: |
- 3" (76 mm) in undogged position
- 2-5/8" (67 mm) in dogged position
|
Stile Width:
|
- 2-1/8" (54 mm) - Minimum stile width required for
1/2" (13 mm) blade stop frame and 4950 blade stop strike
- 3-1/4" (83 mm) - Minimum stile width required for single door,
5/8" (16 mm) stop and 4920 standard strike
- 3-3/4" (95 mm) - Minimum stile width required for
double door x mullion x 4920 strike
- 2-3/4" (70 mm) - Minimum stile width required for double doors
with 2" (51 mm) mullion and 4952 semi-flush mount strike
- All stile widths are measured from door edge
|
Fasteners:
|
- Wood and machine screws
- Thru-bolts
|
Latchbolt:
|
- 3/4" (18 mm) throw, pullman type with automatic
dead-latching, stainless steel
|
Strikes:
|
- Blade stop (4950) - Standard with panic device
- Fire-rated strike (4920F) - Standard with fire-rated device
- Standard strike (4920) - Optional
- Single rabbit strike (4951) - Optional
- Semi-flush mount strike (4952) - Optional
|
Finishes:
|
- US3, US4, US10, US10B, US26, US26D, US32D, BLK
- Trim not available in US32D
|
| Functions: |
- ED - Electric Dogging
- RX - Request to Exit
- EDRX - Electric Dogging with Request to Exit
- ALK - Alarm Kit
- LM - Latch Bolt Monitor
- MLR - Motor Driven Electric Latch Retraction
(Field Installation Kit 2-649-5007)
- MLRX - Motor Driven Electric Latch Retraction with
Request to Exit
- DE - Delayed Egress
|
| Electrical Specifications: |
- ED; .225 AMP @ 24 Volt +/- 2 V
- RX or LM; 125 VAC (3 AMP current); 30 VDC (2 AMP current)
- MLR; 1 AMP in rush @ 24 VDC +/- 2 V
- DE; 430mA @ 24V Single; 680mA @ 24V Tandem
|
| Wire Requirements: |
- Status switches (i.e. RX, LM, etc.) require 2 wires per switch
to monitor a normally open (NO) or normally closed (NC) position
- All devices provide 3 wires per switch so both NO and NC positions can be monitored
- Monitoring both positions will require 3 wires per switch
|
| Quick Connect: |
- Available on ED, LM, MLR, and RX. Compatible with Hager Quick Connect Harness Cables which can plug into Hager hinges with quick connect for quick and accurate wiring of the door.
|
| Warranty: |
- One-year on electrified components
- Lifetime on hardware components
|
| Notes: |
- Recommended to be used on appropriately reinforced doors
|